Chalmers Agar
Cat.No:LA5600 Solarbio
Storage:RT
Qty:
Size:
{{cart_num}}
My CartStorage:RT
Qty:
Size:
Name | Chalmers Agar |
Storage | RT |
Grade | BR |
Unit | Bottle |
Specification | 250g |
Product Introduction:
For lactic acid bacteria plate counting.
Preparation Method:
Weigh 76g of this product in 1L distilled water or deionized water, heat and boil until completely dissolved, subpack, autoclast at 121℃ for 15 minutes, shake well after sterilization and heat preservation to prevent calcium carbonate deposition on the bottom of the vessel and caking, the heat preservation time should not be too long. (If the modified MC medium is prepared, cool it to 55℃, add 10000IU polymyxin B solution to every 100ml medium, shake well, and pour the plate).
Composition: g/L
Soy peptone: 5
Glucose: 20
Lactose: 20
Agar: 15
Beef infusion powder: 3
Yeast infusion powder: 3
Calcium carbonate: 10
Neutral red: 0.05
pH: 6.0±0.2, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark:These protocols are for reference only. Solarbio does not independently validate these methods.
Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Sorry, there is no experimental images.
Sorry, there is no more information.
Sorry, there is no more information.