Aerobe-Anaerobic Agar Medium
Cat.No:LA4510 Solarbio
Storage:RT
Qty:
Size:
{{cart_num}}
My CartStorage:RT
Qty:
Size:
Name | Aerobe-Anaerobic Agar Medium |
Storage | RT |
Grade | BR |
Unit | Bottle |
Specification | 250g |
Product Introduction:
Used for sterilization and disinfection identification test.
Preparation Method:
Weigh 32.2g of this product, boil and dissolve in 1000ml distilled water, subpack, autoclave at 115℃ for 30 minutes, and cool quickly after sterilization. The height of the oxidized layer of the medium shall not exceed 1/5 of the depth of the medium before inoculation, otherwise, it must be heated in a 100℃ water bath until the pink disappears, and it must be cooled rapidly, and it can only be heated once to prevent contamination.
Composition: g/L
Casein peptone: 15
Yeast extraction powder: 5
Beef paste: 3
Sodium chloride: 2.5
Glucose: 5
L-cystine: 0.5
Sodium thioglycolate: 0.5
Azure: 0.001
Agar: 0.7
pH: 7.1±0.2, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark:These protocols are for reference only. Solarbio does not independently validate these methods.
Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Sorry, there is no experimental images.
Sorry, there is no more information.
Sorry, there is no more information.