WL Nutrient Agar
Cat.No:LA1880 Solarbio
Storage:RT,keep dry
Qty:
Size:
{{cart_num}}
My CartStorage:RT,keep dry
Qty:
Size:
Name | WL Nutrient Agar |
Storage | RT,keep dry |
Grade | BR |
Unit | Bottle |
Specification | 250g |
Product introduction
For counting yeast and bacteria in beer and fermentation products.
preparation method
Weigh 80g of this product in 1000ml distilled water (if WL identification medium is prepared, add 4mg of cycloheximide per liter of medium) and boil until completely dissolved. Autoclave sterilization at 121 ° C for 15 minutes. Shake after sterilization to prevent Agar from precipitate on the bottom of the dish and solidify.
composition: g/L
Yeast extract powder: 4.0
Glucose: 50.0
Potassium chloride: 0.425
Calcium chloride: 0.125
Magnesium sulfate: 0.125
Potassium dihydrogen phosphate: 0.55
Ferric chloride: 0.0025
Manganese sulfate: 0.0025
Bromocresol green: 0.022
Agar: 20.0
Acid hydrolyzed casein: 5.0
pH: 5.5±0.2, 25℃
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark:These protocols are for reference only. Solarbio does not independently validate these methods.
Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Sorry, there is no experimental images.
Sorry, there is no more information.
Sorry, there is no more information.