Improved WPM medium
Cat.No:LB0180 Solarbio
Storage:Store at RT,2 years
Qty:
Size:
{{cart_num}}
My CartStorage:Store at RT,2 years
Qty:
Size:
Storage | Store at RT,2 years |
Unit | Bottle |
Specification | 250g |
Product introduction
For the culture of woody plant tissues.
Preparation method
Weigh 0.565g of this product in 1L distilled water or deionized water, dissolve it with heat, add one modified WPM medium additive, mix, subpack, autoclave at 115℃ for 30 minutes, use sterile NaOH or dilute HCl solution adjusted to the required pH if necessary, and set aside.
Composition: g/L
5 water copper sulfate 0.25mg
Ferric Sodium EDTA:73.4mg
Boric acid:6.2mg
Manganese sulfate:22.3mg
2 Sodium molybdate:0.25mg
7 Water zinc sulfate:8.6mg
Potassium dihydrogen phosphate:170mg
Magnesium sulfate:180.54mg
Glycine:2mg
VB1:0.1 mg
Inositol:100mg
Nicotinic acid:0.5mg
VB6:0.5 mg
Precautions
This product may contain a small amount of inorganic salt precipitate.
Note:Product information may be optimized and upgraded. Please refer to the actual label information for accuracy.
Remark:These protocols are for reference only. Solarbio does not independently validate these methods.
Note:
1. The products are all for scientific research use only. Do not use it for medical, clinical diagnosis or treatment, food and cosmetics, etc. Do not store them in ordinary residential areas.
2. For your safety and health, please wear laboratory clothes, disposable gloves and masks.
3. The experimental results may be affected by many factors, after-sale service is limited to the product itself and does not involve other compensation.
Sorry, there is no experimental images.
Sorry, there is no more information.
Sorry, there is no more information.